BOBRICK Fino B9890 Jumbo Toilet Roll Holder Single

Item Number:  B9890

Key Features:

* Seam welded stainless steel jumbo toilet roll holder with a flush lock
* Spindle holds up to 10” (255mm) diameter roll
* Dimensions:  Width: 297mm  -  Height: 324mm  -  Depth: 128mm
* Material: Type 304, 18 gauge (1.2mm), stainless steel
Surface-Mounted Single Jumbo-Toilet Roll Holder door shall be 18 gauge (1,2mm) stainless steel with satin-finish. Cabinet shall be equipped with a lock keyed like other Bobrick washroom accessories. Lock is on top of unit flush with the surface - no protrusion. 
* Cabinet shall have a slot to reveal toilet tissue supply inside cabinet. Spindle shall accommodate one toilet tissue roll up to 255mm diameter with a 40mm diameter core roll convertible for 75mm diameter core rolls or 55mm diameter core roll by adding rubber o-rings (2) furnished

Installation: 

* Mount unit on wall or toilet partition with sheet-metal screws at points indicated by an S. 
* Rear edge of unit should be 20" (510mm) from back wall
* This locates toilet tissue within 180-230mm of front of standard toilet that projects 305mm from back wall.
* For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal screws (not furnished). 
* For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 6mm toggle bolts or expansion bolts.
* For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. 
* For hollow-core metal partitions, provide solid backing into which the sheet-metal screws can be secured. 
* If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition