Dyson Airblade Hand Dryer Airblade Tap WD06 Wall Mount

Item number - WD06

* NEW PRICE, $2359.00, DOWN FROM $2664.60

Key Features:

* Replaces old AB11 model
* This new model is quieter than the old AB11 model
* Improve your washroom's safety: drying your hands at the tap means there is no need to move to a separate drying area, thus avoiding dripping water on the phone
* 14 second drying time
* Hygienic
* Costs less to run (vs hand towels)
* Reduce your impact on the environment
* 77% less expensive to run than other hand dryers
* HACCP accredited and Carbon Trust certified 

Product Data:

Electrical - 
* Input voltage: 200-240V
* Frequency: 50-60 Hz
* Decibel level: 81db
* Rated power: 1,000 W
* Motor type: Dyson digital motor - V4 brushless DC motor
* Motor switching rate: 5,400 per second 
* Motor speed: 81,000 rpm
* Operating temperature range: 0deg - 40degC
* Heater type: None 
* Standby power consumption: Less than 0.5 W

Construction -
* Tap construction: Stainless steel (brushed)
* Under counter motor assembly construction: Moulded ABS (main unit)
* Exterior screw type: Torx T15
* Water ingress protection to IP35

Filter - 
* HEPA filter (glass fibre and fleece prelayer)
* Bacteria removal 99.95% of particles the size of bacteria

Operation - 
* Touch-free infra-red activation
* Hand dry time measurement: 14 seconds (Measurement based on National Sanitation Foundation Protocol P.335) 
* Operation lock-out period: 30 seconds
* Airspeed at apertures: 430 mph
* Operating airflow: Up to 21 l/s

Water operation - 
* Water flow rate: 4 l/min
* Tap Aerator: Aerated water outlet 
* Tap power supply: Mains supply
* Water temperature control: Thermostatic mixer recommended (not supplied)
* Water pressure required: 1-8 Bar

Logistics -
* Net weight: 4.6kg
* Packaged weight: 6.1kg
* Tap dimensions: 312mm W x 303mm D
* Motor bucket dimensions: 262mm H x 141mm W x 189mm D
* Minimum 100mm installation clearance from floor
* Packaged dimensions: H276 x W437 x D280 mm

Sink specification - 
* The Dyson Airblade Tap is compatible with most sink types. 
* Ensure plugs are not installed in the sinks.
* Sink dimensions: All sink measurements are internal unless stated otherwise. 
Width of sink - Minimum: 350mm, Front to back - Minimum: 300mm, Depth of sink - Minimum: 100mm 
* Maximum depth of sink for AB10 only: 200mm (External measurement of vessel sink).
* Sink materials: Sinks with highly polished surfaces should be avoided e.g. shiny chrome. Porcelain or brushed metal are ok to use. When multiple taps are installed side-by-side, tap centres should be a minimum of 580mm apart.

Standard Guarantee/Warranty: 

* 5 year guarantee

WELS 6 star, 3.5L/min, T31049